Zepoxy Marble Seal is a high gloss and high UV resistance purpose-built system for top coating of natural stones, especially light-colored marbles, slates, and granites. It has a low viscosity and a moderate curing rate suitable for excellent impregnation in the marble and then high level of curing in that state. Marble and granite reinforced with Zepoxy Marble Seal show good resistance to yellowing, chemicals and staining, and additionally the epoxy matrix provides it high gloss and strength.
|Appearance Part A||Visual||Low viscosity, clear liquid|
|Appearance Part B||Visual||Low viscosity, clear liquid|
|Mix ratio (Part A : Part B)||Theoretical||100 : 35|
|Mix viscosity @ 25°C||ASTM D 2196||<1000 cPs|
|Flash Point||ASTM D 93||>117°C|
|Pot life (300g mix) @ 30°C||–||27m @ 30⁰C|
|Gel time (18g mix) @ 30°C||–||1h 45m @ 28⁰C|
|Hardening time||–||24 hours|
|Full Cure||–||7 days|
These are typical results under laboratory conditions.
At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.
Zepoxy Marble Seal is available as follows: 1.35 KG Set Part A: 1 KG Part B: 350g 13.5 KG Set Part A: 10 KG Part B: 3.5 KG 40.5 KG Set Part A: 30 KG Part B: 10.5 KG
HEALTH AND SAFETY
Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.