Ressi TG CR Semi-Gloss is a 2-component epoxy-based tile grout based on high grade Resins. It provides excellent chemical resistance, anti-fungal, anti-bacterial and dust proofing properties. Ressi TG CR Semi-Gloss is suitable for the tile joint grouting in Industries where heavy acid use prevails, hospitals, kitchens, chemical spillage rooms, laboratories, swimming pools, etc. roduct that can be used in hospitals, kitchens, chemical spillage rooms, laboratories, etc.
- Excellent chemical resistance
- Excellent resistance to bacterial and fungal growth
- Solvent free
- Shrinkage free and rapid hardening
- High mechanical strength
- Curing is not affected by high humidity.
- Impact and vibration resistant
- Excellent adhesion
|Component||Two: Part A: Base
Part B: Hardener
|Color||Various Colors Available: Refer to Shade Card|
|Mixed Density||1.9 KG / Ltr ± 0.05|
|*Open Time||30 Mins|
|*Full Cure||7 Days|
|*Compressive Strength||75 N / mm2@ 7 Days (Tested as per BS EN 6319-2)|
|*Tensile Strength||15 N / mm2@ 7 Days (Tested as per BS EN 6319-2)|
|*Initial Shear Adhesion Strength||> 2 N / mm2 @ 7 Days (In house Developed Method)|
|*Flexural Strength||30 N / mm2 @ 7 Days (Tested as per BS EN 6319-3)|
|*Chemical Resistance||Please refer to chemical resistance chart provided in this TDS.|
*Typical Results under laboratory conditions
Joints to receive grout should be clean, dry, and free from standing water, grease, loosely adhering particles etc. cement laitance should be removed by mechanical means.
Mix part A with Part B using a slow speed drill machine fitted with a mixing paddle and continue to mix until a uniform consistency is achieved.
Mixed Ressi TG CR Semi-Gloss should be worked into the tile joints using a spatula. It is recommended to use masking tape around the edges of the tiles to avoid any spillage. Excess grout material can be removed with the use of a cloth or sponge along with a suitable solvent. Removal of excess material should be carried out hardening of the applied grout.
CHEMICAL RESISTANCE CHART
|Acetic Acid 99%||NR|
|Acetic Acid 33%||1 day|
|Nitric Acid 57%||NR|
|Nitric Acid 19%||Excellent|
|Sulfuric Acid 98%||NR|
|Sulfuric Acid 33%||Excellent|
|ECH 50% in water||NR|
|DETA 50% in water||1 day|
|Sodium Hydroxide 50%||Excellent|
|Water at 70⁰C||Excellent|
|Sodium Chloride 30%||Excellent|
Excellent: < 5% 80-day mass change
Good: 5-10% 80-day mass change
1-day: < 10% 1-day mass change
No Resistance: > 10 % 1-day mass change
This is a tentative chart for reference only. It is recommended to do a compatibility test and sampling prior to any application
Tile size (W X B)
Ltr / m2
|200 X 200||6||5||*0.370|
|455 X 500||6||5||*0.170|
*Figures are theoretical values only. Allowance for wastage should be considered.
Expiration of Ressi TG CR Semi-Gloss is at 12 months after production date under dry and sheltered conditions. .
Ressi TG CR Semi-Gloss is available as follows.
1.54 KG Set Part A: 1 KG
Part B: 540g
HEALTH AND SAFETY
Ressi TG CR Semi-Gloss is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.