Actual colors may vary. This is due to the fact that every computer monitor has a different capability to display colors and that everyone sees these colors differently. We try to edit our photos to show the samples as life-like as possible, but please understand the actual color may vary slightly from your monitor. We cannot guarantee that the color you see accurately portrays the true color of the product. For more accuracy, we encourage our customers to request for a shade card. This card will be delivered at your postal address by the company itself.
Ressichem Max Flo SP 900
Max Flo SP 900 is a highly effective water reducing superplasticiser and an extremely powerful de-flocculating agent based on soluble salt of polymeric napthalene sulphonate.
Max Flo SP 900 is a highly effective water reducing superplasticiser and an extremely powerful de-flocculating agent based on soluble salt of polymeric napthalene sulphonate.
STANDARD
ASTM C 494 Type F, BS EN 934-2
USES
Max Flo SP 900 is used to produce a flowing concrete for the congested areas, slabs, foundations, large ours, beams, columns, and precast elements. It provides excellent strength gain at early ages and major increase at all ages of concrete.
ADVANTAGES
- Good workability with fast strength gain.
- Economical and cost-effective solution for precast concrete.
- Increases durability by reducing permeability.
- Increased production in precast yards.
- Normal setting without any retardation.
- Chloride free and safe for use in pre-stressed and reinforced concrete.
TYPICAL PROPERTIES 25°C
Property | Test Method | Value |
---|---|---|
Component | – | Single |
Form | – | Liquid |
Color | – | Brown |
Specific Gravity | ASTM C 494 | 1.20 +/- 0.02 |
Air Entrainment | – | Up to 1% over control Mix |
Chloride Content | BSEN 480-10 | Nil to BSEN 934-2 |
pH | ASTM C 494 | 7-9 |
Typical results under laboratory conditions.
Results may vary as per site and usage conditions.
COMPATIBILIYT
Max Flo SP 900 can be used with all types of cements and cementitious materials like fly ash, GGBS, micro silica etc. Max Flo SP 900 should not be premixed with other admixtures unless recommended by Ressichem Technician.
DOSAGE
Recommended dosage is 0.5 – 3.0 % by weight of cementitious material. Higher dosage can be used after verification by conducting lab and site trials. Optimum dosage of Max Flo SP 900 and effect on concrete properties such as workability, strength, setting time, etc. are best assessed after preliminary tests on site using the actual materials of mixes under consideration.
EFFECT OF OVERDOSING
Overdosing may result in higher workability and delay in setting. If intentionally or accidentally, dosage used is above the recommended dosages, care must be taken to allow for the effect on the stripping time of formwork. In such cases, provided the concrete is properly cured, the ultimate strength will generally be higher than the regular concrete.
PACK SIZE
Available in 1 Liter, 5 Liters, 10 Liters, 15 Liters, 30 Liters and 200 Liters of packaging.
DISPENSING
Max Flo SP 900 should be directly dispensed into the concrete mixer together with mixing water.
SHELF LIFE
12 months from the date of manufacture when stored under cool and dry warehouse conditions in original unopened packaging. Extreme temperature and humidity may reduce shelf life.
HEALTH AND SAFETY
This product is considered as non-hazardous and safe for transportation. Suitable masks and gloves can be worn during application. Contact with skin should be avoided. Refer to product MSDS for further health and safety information.
Brand |
Ressichem |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.