Ressichem Ressi TG CR High Gloss 0014 (Yellow)

Ressi TG CR High Gloss is a 2-component solvent free epoxy-based tile grout based on high grade Resins. It provides excellent chemical resistance, anti-fungal, anti-bacterial and dust proofing properties. Ressi TG CR High Gloss is suitable for the tile joint grouting in Industries where heavy chemical use prevails. This is an ideal product that can be used in hospitals, kitchens, chemical spillage rooms, laboratories, etc.

ADVANTAGES 

• Excellent resistance to bacterial and fungal growth
• Solvent free
• Shrinkage free and rapid hardening
• High mechanical strength
• Curing is not affected by high humidity.
• Impact and vibration resistant
• Excellent adhesion
• Mild chemical resistance

TYPICAL PROPERTIES25°C

^{*Typical Results under laboratory conditions}

SURFACE PREPARATION

Joints to receive grout should be clean, dry, and free from standing water, grease, loosely adhering particles etc. cement laitance should be removed by mechanical means. All the areas surrounding the joints must be taped thoroughly. Ressi TG CR High Gloss is a pourable tile grout, taping should be done with the most care as cleaning this material from various tile surfaces is difficult and can also damage the tiles.

MIXING

Mix part A with Part B using a slow speed drill machine fitted with a mixing paddle and continue to mix until a uniform consistency is achieved.

APPLICATION

Mixed Ressi TG CR High gloss should be worked into the tile joints using a spatula. It is recommended to use masking tape around the edges of the tiles to avoid any spillage. Excess grout material can be removed with the use of a cloth or sponge along with a suitable solvent while the material is still wet and has not cured completely.

CHEMICAL RESISTIVITY CHART

*This is a tentative chart for reference only. It is recommended to do a compatibility test and sampling prior to any application.

COVERAGE

*Figures are theoretical values only. Allowance for wastage should be considered.

SHELF LIFE

Expiration of Ressi TG CR High Gloss is at 12 months after production date under dry and sheltered conditions.

PACKAGING

Ressi TG CR High Gloss is available in the following packaging.

1.4 KG Kits                                       Part A: 1 KG
Part B: 400g

HEALTH AND SAFETY

Ressi TG CR High Gloss is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.

NOTE

Ressi TG CR High Gloss is available in many standard different colors. Please Refer to the product shade card for color reference. Please note that the colors presented in the shade cards are for reference, the color shade may vary with the difference in the application and methodology along with the production availability of pigments at source. The coverage presented in the Technical data sheet is theoretical. Place an actual area on site to check for the coverage and color outcome on the job site.